Our Premier 110 series sampling mini rig and associated tools form an integrated system, offering an innovative solution to undisturbed soil core sampling, groundwater sampling and monitoring, contaminant logging, window/windowless sampling, standard penetration testing (SPTs) and dynamic probing.
The Premier 110 is mounted on rubber tracks, keeping ground disturbance to a minimum. Good manoeuvrability makes this an ideal rig to use where site access is tight or challenging.
| Barell size (mm) | Liner size (mm) | Sample O.D. |
| 116 | 102 | 100 |
| 101 | 87 | 85 |
| 86 | 75 | 73 |
| 76 | 67 | 65 |
| 66 | 57 | 55 |
| 56 | 45 | 43 |
Percussive windowless sampling using hand-held equipment can also be carried out using a portable jack-hammer system.
The windowless sample tubes are driven into the ground using a hydraulic breaker/hammer and are then retrieved with the use of a compact hydraulic jack.
This system is ideal for use in sites with restricted access where conventional window sample rigs are unable to be used. Should there be a need for internal percussive sampling, we can provide suitably distanced hydraulic hoses to allow the power pack to be located away from the working area. This could be used to alleviate the problem of exhaust fumes when working in confined spaces.
This is by far our most common method of drilling. This can be carried out using either air mist or water/mud flush.
This is an increasingly popular technique of drilling for obtaining windowless samples in soil, over burden and made up ground.
This is an effective method of drilling which can be carried out using air mist or water/mud flush and is commonly used for tasks such as detecting coal or even historically mined coal.
Our Putzmeister SP11 mixer is a single axle, road towable, stand alone high pressure grouter.
A typical water well can vary from 30m to 80m but can go much deeper depending on water tables.
An integrated system, offering an innovative solution to undisturbed soil core sampling, groundwater sampling and monitoring.
Site investigation is the initial process we carry out to collect and assess data.
Drilling is required to the suitable depth of the specific site. Typically raging from 100m – 150m.
Our diamond drilling services cut holes quickly and cleanly from 50mm to 300mm diameter and to various depths using barrel extensions. We can core through reinforced concrete, brickwork, stonework, block and asphalt. We use Xcalibre core machines and also hand held which are also ideal for confined spaces, all with a water feed to ensure a clean, dust-free environment.
0191 5812557