Geobore-S Wireline Coring is by far our most common method of drilling. This can be carried out using either air mist or water/mud flush.
Geobore-S Wireline Coring is by far our most common method of drilling. This can be carried out using either air mist or water/mud flush.
The inner core barrel/inner tube assembly is lowered into the outer core barrel using specific devices depending on the method of drilling.
Once a core run has been carried out, a retrieval device – either a dry hole device or an overshot (wet hole) device – is lowered to the inner barrel on a wireline winch. This then extracts the inner barrel from the outer.
This is an innovative method that not only gains an excellent sample but a great deal more production. All our drilling technicians have had extensive training and now carry out the familiar coring process with speed and safety.
We continue to work with our suppliers regularly to provide ongoing safety training. Our sites and equipment are regularly assessed by Kris McCormack of Terraroc to ensure the consistent safety of all our operations and equipment.
We have recently purchased the 194mm (7.6’’) O.D. symmatrex casing system. This allows for all overburden/superficials to be cased off with ease then Geobore-S wireline coring to be carried out immediately.
This is by far our most common method of drilling. This can be carried out using either air mist or water/mud flush.
This is an increasingly popular technique of drilling for obtaining windowless samples in soil, over burden and made up ground.
This is an effective method of drilling which can be carried out using air mist or water/mud flush and is commonly used for tasks such as detecting coal or even historically mined coal.
Our Putzmeister SP11 mixer is a single axle, road towable, stand alone high pressure grouter.
A typical water well can vary from 30m to 80m but can go much deeper depending on water tables.
An integrated system, offering an innovative solution to undisturbed soil core sampling, groundwater sampling and monitoring.
Site investigation is the initial process we carry out to collect and assess data.
Drilling is required to the suitable depth of the specific site. Typically raging from 100m – 150m.
Our diamond drilling services cut holes quickly and cleanly from 50mm to 300mm diameter and to various depths using barrel extensions. We can core through reinforced concrete, brickwork, stonework, block and asphalt. We use Xcalibre core machines and also hand held which are also ideal for confined spaces, all with a water feed to ensure a clean, dust-free environment.
0191 5812557