We carry out grouting using our Putzmeister SP11 mixer is a single axle, road-towable, standalone high-pressure grouter.
We carry out grouting using our Putzmeister SP11 mixer is a single axle, road-towable, standalone high-pressure grouter.
Version: SP11 Putzmeister
Pump type: 2L6
Theoretical delivery rate: 5-60l/min
Delivery distance: 60m horizontal and 40m vertical
Compressor: 2-cylinder compressor 400l/m, 7 bar
Lifting mixer: 180l
Conveyor hopper: 220l
Engine: 3-cylinder Kubota, 16.3 kW at 2,600 rpm
Chassis: unbraked, suitable for road use
Weight: 750kg
Length x width x height: 3260 x 1420 x 1160mm
Filling height: 800mm
Maximum particle size: 6mm
The SP11 processes dry mortar and site mixes. It both thoroughly combines compounds and pumps them to where required. In operation, dry mortar, water and concrete admixtures are mixed and poured into the hopper.
Once mixed in the hopper, liquid grout is poured into the holding tank. The auger pump then conveys the mixture from the hopper. Liquid grout is pushed through a 2’ outlet on the machine through a tremi pipe. It’s then forced down the borehole and eventually sets and solidifies the borehole. This process needs a minimum of 24 hours to work properly.
This is by far our most common method of drilling. This can be carried out using either air mist or water/mud flush.
This is an increasingly popular technique of drilling for obtaining windowless samples in soil, over burden and made up ground.
This is an effective method of drilling which can be carried out using air mist or water/mud flush and is commonly used for tasks such as detecting coal or even historically mined coal.
Our Putzmeister SP11 mixer is a single axle, road towable, stand alone high pressure grouter.
A typical water well can vary from 30m to 80m but can go much deeper depending on water tables.
An integrated system, offering an innovative solution to undisturbed soil core sampling, groundwater sampling and monitoring.
Site investigation is the initial process we carry out to collect and assess data.
Drilling is required to the suitable depth of the specific site. Typically raging from 100m – 150m.
Our diamond drilling services cut holes quickly and cleanly from 50mm to 300mm diameter and to various depths using barrel extensions. We can core through reinforced concrete, brickwork, stonework, block and asphalt. We use Xcalibre core machines and also hand held which are also ideal for confined spaces, all with a water feed to ensure a clean, dust-free environment.
0191 5812557